Ultra Glaco

How to use the product

Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel. Keep dry for 12 hours for maximum effect and durability.

Precautions for use

USE ONLY FOR INTENDED PURPOSE.

BE CAREFUL. WHEN THERE ARE CHANGES IN TEMPERATURE/HUMIDITY, LIKE WHEN COMING OUT OF A TUNNEL, GLASS MAY TURN TEMPORARILY WHITE.

IN THIS CASE, USE THE WIPERS IMMEDIATELY TO REGAIN VISIBILITY.

MAY CAUSE DAMAGE TO WIPER RUBBER CAUSING IT TO RATTLE. IN THIS CASE, PLEASE REPLACE.

DO NOT USE ON THE INSIDE OF THE GLASS.

DO NOT USE ON TRANSPARENT PLASTIC SURFACES SUCH AS HEADLIGHTS, VISORS, WIND GUARDS, GOGGLES ETC.

DO NOT USE ON GLASS OR MIRRORS THAT ARE ALREADY COATED.

WASH HANDS WELL WITH SOAP AFTER USE. DEPENDING ON USAGE, RESULTS AND DURABILITY MAY VARY.

IF REPELLENCY IS REDUCED, REAPPLY. DO NOT USE WITH OIL-FILM REMOVER WASHER FLUID.

USE ONLY WATER OR HYDROPHONIC WASHERS SUCH AS GLACO WASHERS (SOLD SEPARATELY).

Warnings/General Notes

DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.

AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.

FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE. BE CAREFUL. WHEN THERE ARE CHANGES IN TEMPERATURE/HUMIDITY, LIKE WHEN COMING OUT OF A TUNNEL, GLASS MAY TURN TEMPORARILY WHITE.

IN THIS CASE, USE THE WIPERS IMMEDIATELY TO REGAIN VISIBILITY.

KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.